Auto Spray Painting Techniques – How To Paint Your Car
you wont believe it, but spray paint can genuinely be that easy.. That does not signify that you could just seize a tin of paint and go at it. There are various fundamentals you need to recognise. Both in the preparation and application.
Step A: Prepare by gathering all of your items that youre going to need. Make sure your surrounding area is well-kept against whatever possible over spray. Any parts that do not require to be sprayed and that could be removed then do so. For some other areas cover properly with paper and masking tape.
Step B: You’ll have to examine the car carefully for any rough spots. These’ll need to be sanded with 300 grit sand paper. This would smooth out the rough spots. It likewise allows the spray car paint to adhere better. Once youve finished sanding, be sure every of the dust dirt and debris are removed from the car. Its imperative that the car be perfectly clean.
Step C: You will need to apply a primer. This’ll make sure that you get an over all even coat of your colored paint plus helps the paint to adhere well. When you spray the primer, make sure you apply light coats and allow for drying in between. How to spray car paint takes a bit getting used to.
Step D: Now you’re pretty well to the point where you’re about ready to spray the color. You would have settled to utilise the spray car paint that comes in aerosol cans, or perhaps you have chosen the spray gun. In both case, make a few practice strokes on an object before you start with the car. Once you are ready, start the passes with the paint with out hesitation. If you hold the spray can or gun in one spot, you would end up with irregular coverage and possibly the paint will run. If this happens you have a major repair job on your hand. You will most probably have instructions as to how to spray car paint utilising the equipment or spray cans.
Step E: Its up to you whether you want to wet sand between coats of primer and color paints. You will want to research this choice on the net, or check with somebody that is familiar with how to spray car paint
Step F: Once you are completely fulfilled with the colour, youre down to the finishing touches. You’ll now want to apply various clear coats. This would give the gloss and finished look to the car as well as protect the finish. Probably two coats would be enough but it’ll be up to you. Make absolutely sure it’s dry in between coats.
Step G: Again, youve the selection of wet sanding if you prefer. Once more, I advise you ask the advice of people that are familiar with how to spray paint a car. Say you decide to follow this step then you require to wet sand with the following grits in this order. Utilize 800, 1000, one thousand two hundred, one thousand five hundred and lastly the two thousand. This’ll get rid of spots that may be overly heavy in the clear coat application.
Step H: At present you will need to utilising a rubbing compound to buff the surface so you could utilise a 2 thousand grit to get rid of whatever scratches.
Step I: You should now buff the surface. To do this just use a medium cut polish. Once you have done this, you should have a perfect glassy look to the finish.
Step J: Lastly, you may want to apply a couple of coats of wax.